Some of the most likely reasons for some of the layers not aligning in your 3D printer are as fol-lows: There may be an issue with the belts, some of the motors or pulleys may not be fully tight-ened...
Archives: Blog
When looking at boards for your 3D printer, two of your top choices is between Arduino and Raspberry Pi. These are two boards that each have their advantages and disadvantages that users can enjoy....
When it comes to the 3D printer, there are a lot of reasons why your printer won’t print or has trouble printing out your project as you intended. These 10 major issues include: • Clogged...
Sandblasting is one of three ways to get a quality finish on your 3D prints. The others are sanding with sandpaper and vapor smoothing. Therefore, sandblasting is an effective way to get a...
You can cut BuildTak’s 3D Printing Surfaces to fit your 3D printer’s build plate if BuildTak does not have a pre-measured size that will fit your printer, or if you ended up with the wrong size....
There are several inexpensive 3D printers available on the market. In most cases, these will offer great quality, giving you premium features. This can include the ability to upload your model via...