When it comes to the 3D printer, there are a lot of reasons why your printer won’t print or has trouble printing out your project as you intended. These 10 major issues include: • Clogged...
Category: FAQ
Sandblasting is one of three ways to get a quality finish on your 3D prints. The others are sanding with sandpaper and vapor smoothing. Therefore, sandblasting is an effective way to get a...
You can cut BuildTak’s 3D Printing Surfaces to fit your 3D printer’s build plate if BuildTak does not have a pre-measured size that will fit your printer, or if you ended up with the wrong size....
A 3D printer creates new objects out of filament that is printed layer by layer. A laser cutter on the other hand cuts pieces out of an existing block of material. The key difference is in how they...
You can print ABS filament without an enclosure, but should not. As a 3D filament, ABS has advantages, but disadvantages too. Those disadvantages include toxicity and the need for careful temperature...
It’s possible to pause a print overnight. This feature will be standard across most devices, accessed via the menu. However, you should be aware that this can cause some issues, such as creating a...